dedge C12 (108 octane)
Joined: 01 Feb 2006 Posts: 225 Location: Douglas,GA
|
Posted: Mon Feb 04, 2008 3:09 pm Post subject: FS: 5.0 shortblock, E7 heads, Edelbrock intake |
|
|
Few things for sale soon.
WORN THE F*** OUT 5.0L shortblock ~ Make Offer
Bottom end done in aug 07, 200k+ on pistons, rings, cylinder walls.
The good......
Its got a small aftermarket cam but have no info on it.
Motor holds 16 psi oil pressure hot at idle, 30 psi cruising speed. In august i replaced the bottom end bearings, oil pump, cam bearings, but did not touch the pistons or rings.
The block & crank are standard they have never been bored or worked.
The bad......
Wristpins rattle pretty damn good so i guess the high miles are getting to it.
Its got blow-by like a pulling tractor
its not out yet and wont be untill i have the 351w ready to go in but hell if i can get something out of it it will help recover from building the 351.
I also have a edelbrock performer 289 intake for $75 OBO
Reworked E7 heads ~ ported, polished, Crane "purple" springs good for a .600 lift cam, larger valves (not sure on size) Approx.
over $700 invested , sell for $350 OBO. _________________ 89 NOTCH..... 5.8 TO BE |
|