|
South Georgia Hotrods The Local Area's Home for Gearheads!!
|
View previous topic :: View next topic |
Author |
Message |
Mike Harris Mid-Grade (89 octane)
Joined: 27 Jan 2007 Posts: 12
|
Posted: Thu May 10, 2007 7:18 pm Post subject: 331 Bottom end plus more |
|
|
Car sold so engine is for sale
This is a 331 stroker engine. It comes with pretty much all you need except the carb , heads, etc. but I will throw in an Xcellerator intake. Unassembled, and machine work freshly done. Here’s what you get:
· 1992 5.0 block. Cleaned, align honed, decked, and deck surface made to work with Fel-Pro MLS Head gaskets. Freeze plugs tapped for screw-in plugs, and comes with the screw-in freeze plugs as well. Bored and honed to match pistons .040 over.
· Crankshaft is cast with Ford journals (rods- 2.1232 mains- 2.2486). Comes with Clevite H-series bearings.
· Superlite I-Beam 5.315 rods w/ ARP bolts.
· DSS 12.2:1 (60cc head) Pro-lite forged pistons. -6cc dome piston using a 1.5mm/1.5mm/4mm ring package so the oiling ring land is not intersected. (These are $800 pistons.) 4.040
· Plasma-moly Sealed Power file-to-fit piston ring set.
· Cam bearings (not installed).
· Custom hydraulic roller camshaft. 540/576 lift w/ 1.6 rockers; 234/238 @ .050; 110 LSA.
· Scorpion 1.6 roller rockers.
· Felpro MLS head gaskets.
· Fidanza 157T aluminum flywheel (used but great shape). (28oz)
· Professional Products harmonic balancer with adapter. (28oz)
· ARP flywheel bolt kit and pressure plate bolt kit.
· Moroso oil pan and pick-up (used but good condition)
· Mac 1-5/8 long tube headers with 3-bolt flange. (used but good condition)
· Timing chain cover
· Rollmaster Billet timing chain set.
· ARP Intake bolt set.
$1500 firm.
If not sold in a week, it goes to E-Bay. _________________ Mike Harris
Mike's Christian Corner
http://www.mikeschristiancorner.com |
|
Back to top |
|
|
Mike Harris Mid-Grade (89 octane)
Joined: 27 Jan 2007 Posts: 12
|
Posted: Sat May 12, 2007 10:25 pm Post subject: |
|
|
I have 15 pictures of all the parts on a page on my website with an updated list. Lots of stuff here. I hope it is okay with the webmasters for me to have a link pointing to that. Just click the link to the page below...
http://mikeschristiancorner.com/engine.html
Due to a number of people asking about shipping, I am checking on material to build a crate, as well as shipping costs. If you want it, and need it shipped, I would need your zip code to get shipping costs. _________________ Mike Harris
Mike's Christian Corner
http://www.mikeschristiancorner.com |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|