View previous topic :: View next topic |
Author |
Message |
Site Admin Site Admin
Joined: 22 Dec 2005 Posts: 640
|
Posted: Wed Jan 18, 2006 9:22 am Post subject: T5 & T45 Speedometer Gear Correction *Updated* |
|
|
Last edited by Site Admin on Tue Jan 31, 2006 6:17 pm; edited 4 times in total |
|
Back to top |
|
|
asemaster VP Red (105 octane)
Joined: 20 Jan 2006 Posts: 101 Location: kingsland ga
|
Posted: Wed Jan 25, 2006 12:39 am Post subject: |
|
|
Mike do you happen to have the Ford part # for the 21 tooth gear? |
|
Back to top |
|
|
Site Admin Site Admin
Joined: 22 Dec 2005 Posts: 640
|
Posted: Wed Jan 25, 2006 5:31 am Post subject: |
|
|
C4OZ-17271-A for a manual trans
D00Z-17271-B for an automatic trans
(some places leave out the 17271) |
|
Back to top |
|
|
capri man My teeth are my own, I have the receipt
Joined: 26 Dec 2005 Posts: 210 Location: doerun, ga.
|
Posted: Wed Jan 25, 2006 9:31 am Post subject: |
|
|
will the 21 work on a c-5 with 3.27 gears?? |
|
Back to top |
|
|
Site Admin Site Admin
Joined: 22 Dec 2005 Posts: 640
|
Posted: Wed Jan 25, 2006 10:48 am Post subject: |
|
|
You'd have to check and see which drive gear you have, which means yanking the tail housing. If it is a 9T, then the 21 will work. If it is an 8T, it would be a 19. This is assumimg you still have 28" tall tires. |
|
Back to top |
|
|
asemaster VP Red (105 octane)
Joined: 20 Jan 2006 Posts: 101 Location: kingsland ga
|
Posted: Thu Jan 26, 2006 8:12 pm Post subject: |
|
|
thanks for the reply Mike, I did a 3.73 swap and lost my cheat sheet |
|
Back to top |
|
|
Site Admin Site Admin
Joined: 22 Dec 2005 Posts: 640
|
Posted: Tue Jan 31, 2006 6:18 pm Post subject: |
|
|
Okay. Hopefully that shows up for everyone. |
|
Back to top |
|
|
asemaster VP Red (105 octane)
Joined: 20 Jan 2006 Posts: 101 Location: kingsland ga
|
Posted: Wed Feb 01, 2006 9:46 pm Post subject: |
|
|
thanks for the update Mike. that helps a lot! |
|
Back to top |
|
|
|