South Georgia Hotrods

dedge

I need a 351W carb intake for my motor swap. Ill be running a comp cams 260H cam, it has a .447/.447 lift i think (which is small i know) but im looking for a good used intake that will be good for bottom end power like a performer or a torker II. If anyone has anything let me know soon please. Also if you just happen to have a 351w oil pan and pickup that will work in a foxbody ill take it instead of buying the whole swap kit for $135 which comes wiith the pan, pickup & dipstick tube. Also i will be needing the 351w swap P/S bracket so if you got one im interested so maybe i dont have to spend the $65 for it. I wont be runnng A/C. Anything thing else you have that i may could use, post it up and we will talk.

BTW I WONT FUCK YA OVER.
_________________
89 NOTCH..... 5.8 TO BE

dedge · Posted: Mon Feb 04, 2008 1:59 pm Post subject:

Also could use
3.73 or 4.10 gears for a 8.8.
Any kind of aftermarket control arms, MINE ARE SHOT.

and i may be needing a cowl hood, id like a 2-4 inch
_________________
89 NOTCH..... 5.8 TO BE

dedge · Posted: Wed Mar 05, 2008 1:52 pm Post subject:

ill need a intake
_________________
89 NOTCH..... 5.8 TO BE

ITSAV6 · VP Red (105 octane) Joined: 26 Dec 2005 Posts: 183

Summit has an intake new for around $90
_________________
87 Buick T Type,91 Mustang GT,67 GTO vert.
My Buick site... http://sogaturbobuicks.4t.com/
My Stang site... http://com5.runboard.com/bsogastangs